2026-09-28
When you order a CRF110 Dirt Bike Plastic Fuel Tank With Gas Cap Replacement from Max Trading, one of the first questions that comes to mind is whether the package includes every piece of mounting hardware you need for a clean install. The short answer is that it depends on the specific kit, but Max Trading has structured its product lines so riders know exactly what arrives at their door. This guide breaks down what is typically included, what you may need to reuse, and how to verify fitment before you buy.
Most CRF110 Dirt Bike Plastic Fuel Tank With Gas Cap Replacement kits are sold as a tank body plus a vented gas cap. Mounting hardware is often treated as a separate line item because the stock bolts, rubber grommets, and collars on a Honda CRF110F are reusable in many cases.
| Component | Typically Included | Notes |
|---|---|---|
| Plastic fuel tank body | Yes | Direct OEM-style fitment |
| Gas cap | Yes | Vented, gasket pre-installed |
| Tank mounting bolts | Sometimes | Often reused from stock |
| Rubber grommets / cushions | Rarely | Inspect for cracking |
| Fuel petcock / valve | No | Reuse OEM or add separately |
| Fuel line and clamps | No | Replace if brittle |
| Installation instructions | Varies | Max Trading provides guidance |
Aftermarket tanks are produced to different price points. A budget CRF110 Dirt Bike Plastic Fuel Tank With Gas Cap Replacement may include only the tank and cap, while a premium kit from Max Trading can ship with a fastener set. The deciding factors are:
OEM vs. aftermarket spec – Some kits mirror Honda’s factory setup, assuming you transfer original hardware.
Model year differences – 2013–2018 and 2019+ CRF110F frames use slightly different mounting points.
Seller packaging standards – Max Trading lists included components clearly on each product page.
Read the product description for the phrase “hardware included.”
Check the parts diagram for your specific model year.
Contact Max Trading support with your VIN or model year.
Inspect your existing grommets and collars before installation.
Order a bolt kit if your stock fasteners are rusted or stripped.
Always drain fuel before removing the old tank.
Replace the gas cap gasket if it shows flattening or cracks.
Use blue thread locker on tank bolts, not red.
Route the fuel line away from hot engine surfaces.
Pressure-test the cap and petcock before first ride.
Does a CRF110 Dirt Bike Plastic Fuel Tank With Gas Cap Replacement come with all mounting hardware?
Not always. Many kits include the tank and gas cap only, requiring you to reuse stock bolts and grommets. Max Trading specifies on each listing whether a fastener set is included, so you can confirm before purchase.
Will a CRF110 Dirt Bike Plastic Fuel Tank With Gas Cap Replacement fit my 2021 Honda CRF110F?
Yes, provided the kit is listed for 2019 and newer models. Max Trading labels fitment by year range, and the mounting pattern matches the factory frame when the correct generation is selected.
How do I know if I need new mounting hardware for my CRF110 Dirt Bike Plastic Fuel Tank With Gas Cap Replacement?
Inspect the original bolts for corrosion, rounded heads, or stretched threads, and check the rubber grommets for cracks or hardening. If any show wear, order a replacement hardware kit from Max Trading at the same time as the tank.
Choosing the right CRF110 Dirt Bike Plastic Fuel Tank With Gas Cap Replacement is easier when you know what ships in the box. Max Trading keeps hardware details transparent so you can plan a complete install without surprises. For fitment questions, bulk orders, or to confirm whether a specific kit includes mounting hardware, contact us today and our team will help you get the right parts the first time.